Object To Object Mapping

It's common to map an object to another similar object. It's also tedious and repetitive since generally both classes have the same or similar properties mapped to each other. Imagine a typical application service method below:

public class UserAppService : ApplicationService
{
    private readonly IRepository<User, Guid> _userRepository;

    public UserAppService(IRepository<User, Guid> userRepository)
    {
        _userRepository = userRepository;
    }

    public void CreateUser(CreateUserInput input)
    {
        //Manually creating a User object from the CreateUserInput object
        var user = new User
        {
            Name = input.Name,
            Surname = input.Surname,
            EmailAddress = input.EmailAddress,
            Password = input.Password
        };

        _userRepository.Insert(user);
    }
}

CreateUserInput is a simple DTO class and the User is a simple entity. The code above creates a User entity from the given input object. The User entity will have more properties in a real-world application and manually creating it will become tedious and error-prone. You also have to change the mapping code when you add new properties to User and CreateUserInput classes.

We can use a library to automatically handle these kind of mappings. ABP provides abstractions for object to object mapping and has an integration package to use AutoMapper as the object mapper.

IObjectMapper

IObjectMapper interface (in the Volo.Abp.ObjectMapping package) defines a simple Map method. The example code introduced before can be re-written as shown below:

public class UserAppService : ApplicationService
{
    private readonly IRepository<User, Guid> _userRepository;

    public UserAppService(IRepository<User, Guid> userRepository)
    {
        _userRepository = userRepository;
    }

    public void CreateUser(CreateUserInput input)
    {
        //Automatically creating a new User object using the CreateUserInput object
        var user = ObjectMapper.Map<CreateUserInput, User>(input);

        _userRepository.Insert(user);
    }
}

ObjectMapper is defined in the ApplicationService base class in this example. You can directly inject the IObjectMapper interface when you need it somewhere else.

Map method has two generic argument: First one is the source object type while the second one is the destination object type.

If you need to set properties of an existing object, you can use the second overload of the Map method:

public class UserAppService : ApplicationService
{
    private readonly IRepository<User, Guid> _userRepository;

    public UserAppService(IRepository<User, Guid> userRepository)
    {
        _userRepository = userRepository;
    }

    public async Task UpdateUserAsync(Guid id, UpdateUserInput input)
    {
        var user = await _userRepository.GetAsync(id);

        //Automatically set properties of the user object using the UpdateUserInput
        ObjectMapper.Map<UpdateUserInput, User>(input, user);

        await _userRepository.UpdateAsync(user);
    }
}

You should have defined the mappings before to be able to map objects. See the AutoMapper integration section to learn how to define mappings.

AutoMapper Integration

AutoMapper is one of the most popular object to object mapping libraries. Volo.Abp.AutoMapper package defines the AutoMapper integration for the IObjectMapper.

Once you define mappings described as below, you can use the IObjectMapper interface just like explained before.

Define Mappings

AutoMapper provides multiple ways of defining mapping between classes. Refer to its own documentation for all details.

One way to define object mappings is creating a Profile class. Example:

public class MyProfile : Profile
{
    public MyProfile()
    {
        CreateMap<User, UserDto>();
    }
}

You should then register profiles using the AbpAutoMapperOptions:

[DependsOn(typeof(AbpAutoMapperModule))]
public class MyModule : AbpModule
{
    public override void ConfigureServices(ServiceConfigurationContext context)
    {
        Configure<AbpAutoMapperOptions>(options =>
        {
            //Add all mappings defined in the assembly of the MyModule class
            options.AddMaps<MyModule>();
        });
    }
}

AddMaps registers all profile classes defined in the assembly of the given class, typically your module class. It also registers for the attribute mapping.

Configuration Validation

AddMaps optionally takes a bool parameter to control the configuration validation for your module:

options.AddMaps<MyModule>(validate: true);

While this option is false by default, it is suggested to enable configuration validation as a best practice.

Configuration validation can be controlled per profile class using AddProfile instead of AddMaps:

options.AddProfile<MyProfile>(validate: true);

If you have multiple profiles and need to enable validation only for a few of them, first use AddMaps without validation, then use AddProfile for each profile you want to validate.

Mapping the Object Extensions

Object extension system allows to define extra properties for existing classes. ABP Framework provides a mapping definition extension to properly map extra properties of two objects.

public class MyProfile : Profile
{
    public MyProfile()
    {
        CreateMap<User, UserDto>()
            .MapExtraProperties();
    }
}

It is suggested to use the MapExtraProperties() method if both classes are extensible objects (implement the IHasExtraProperties interface). See the object extension document for more.

Other Useful Extension Methods

There are some more extension methods those can simplify your mapping code.

Ignoring Audit Properties

It is common to ignore audit properties when you map an object to another.

Assume that you need to map a ProductDto (DTO) to a Product entity and the entity is inheriting from the AuditedEntity class (which provides properties like CreationTime, CreatorId, IHasModificationTime... etc).

You probably want to ignore these base properties while mapping from the DTO. You can use IgnoreAuditedObjectProperties() method to ignore all audit properties (instead of manually ignoring them one by one):

public class MyProfile : Profile
{
    public MyProfile()
    {
        CreateMap<ProductDto, Product>()
            .IgnoreAuditedObjectProperties();
    }
}

There are more extension methods like IgnoreFullAuditedObjectProperties() and IgnoreCreationAuditedObjectProperties() those can be used based on your entity type.

See the "Base Classes & Interfaces for Audit Properties" section in the entities document to know more about auditing properties.

Ignoring Other Properties

In AutoMapper, you typically write such a mapping code to ignore a property:

public class MyProfile : Profile
{
    public MyProfile()
    {
        CreateMap<SimpleClass1, SimpleClass2>()
            .ForMember(x => x.CreationTime, map => map.Ignore());
    }
}

We found it unnecessarily long and created the Ignore() extension method:

public class MyProfile : Profile
{
    public MyProfile()
    {
        CreateMap<SimpleClass1, SimpleClass2>()
            .Ignore(x => x.CreationTime);
    }
}

Advanced Topics

IObjectMapper Interface

Assume that you have created a reusable module which defines AutoMapper profiles and uses IObjectMapper when it needs to map objects. Your module then can be used in different applications, by nature of the modularity.

IObjectMapper is an abstraction and can be replaced by the final application to use another mapping library. The problem here that your reusable module is designed to use the AutoMapper library, because it only defines mappings for it. In such a case, you will want to guarantee that your module always uses AutoMapper even if the final application uses another default object mapping library.

IObjectMapper<TContext> is used to contextualize the object mapper, so you can use different libraries for different modules/contexts.

Example usage:

public class UserAppService : ApplicationService
{
    private readonly IRepository<User, Guid> _userRepository;   
    
    private readonly IObjectMapper<MyModule> _objectMapper;

    public UserAppService(
        IRepository<User, Guid> userRepository, 
        IObjectMapper<MyModule> objectMapper) //Inject module specific mapper
    {
        _userRepository = userRepository;
        _objectMapper = objectMapper;
    }

    public async Task CreateUserAsync(CreateUserInput input)
    {
        //Use the module specific mapper
        var user = _objectMapper.Map<CreateUserInput, User>(input);

        await _userRepository.InsertAsync(user);
    }
}

UserAppService injects the IObjectMapper<MyModule>, the specific object mapper for this module. It's usage is exactly same of the IObjectMapper.

The example code above don't use the ObjectMapper property defined in the ApplicationService, but injects the IObjectMapper<MyModule>. However, it is still possible to use the base property since the ApplicationService defines an ObjectMapperContext property that can be set in the class constructor. So, the example about can be re-written as like below:

public class UserAppService : ApplicationService
{
    private readonly IRepository<User, Guid> _userRepository;

    public UserAppService(IRepository<User, Guid> userRepository)
    {
        _userRepository = userRepository;
        //Set the object mapper context
        ObjectMapperContext = typeof(MyModule);
    }

    public async Task CreateUserAsync(CreateUserInput input)
    {
        var user = ObjectMapper.Map<CreateUserInput, User>(input);

        await _userRepository.InsertAsync(user);
    }
}

While using the contextualized object mapper is same as the normal object mapper, you should register the contextualized mapper in your module's ConfigureServices method:

[DependsOn(typeof(AbpAutoMapperModule))]
public class MyModule : AbpModule
{
    public override void ConfigureServices(ServiceConfigurationContext context)
    {
        //Use AutoMapper for MyModule
        context.Services.AddAutoMapperObjectMapper<MyModule>();

        Configure<AbpAutoMapperOptions>(options =>
        {
            options.AddMaps<MyModule>(validate: true);
        });
    }
}

IObjectMapper<MyModule> is an essential feature for a reusable module where it can be used in multiple applications each may use a different library for object to object mapping. All pre-built ABP modules are using it. But, for the final application, you can ignore this interface and always use the default IObjectMapper interface.

IObjectMapper<TSource, TDestination> Interface

ABP allows you to customize the mapping code for specific classes. Assume that you want to create a custom class to map from User to UserDto. In this case, you can create a class that implements the IObjectMapper<User, UserDto>:

public class MyCustomUserMapper : IObjectMapper<User, UserDto>, ITransientDependency
{
    public UserDto Map(User source)
    {
        //TODO: Create a new UserDto
    }

    public UserDto Map(User source, UserDto destination)
    {
        //TODO: Set properties of an existing UserDto
        return destination;
    }
}

ABP automatically discovers and registers the MyCustomUserMapper and it is automatically used whenever you use the IObjectMapper to map User to UserDto.

A single class may implement more than one IObjectMapper<TSource, TDestination> each for a different object pairs.

This approach is powerful since MyCustomUserMapper can inject any other service and use in the Map methods.